Interlogix DVR 60 User Manual - Manual (Page 35)

3BChapter 4: Operating instructions
TruVision DVR 60 User Manual 29
Main menu overview
The TVR 60 has an icon-driven menu structure that allows you to configure the
unit’s parameters. Figure 11 below shows the TVR 60 main menu screen. Each
command icon displays a screen that lets you edit a group of TVR 60 settings.
Most screens are available only to system administrators.
You must be in live mode to access the main menu.
The currently selected command icon is highlighted in green.
Figure 11: Main menu
Table 6: Description of the menu commands and options
Main menu command icon Description
Display Configures display settings including dwell time, schedule, language and
display formats.
Cameras Configures camera settings including motion detection, video image
adjustments, camera title, and copy settings to other cameras. See
Record Configures recording settings including recording schedules, record quality,
and record mode.
Network Configures standard network settings including IP address, e-mail
notifications, DDNS setup, and advanced network settings.
Alarms Configures alarm settings including alarm input, relay output, video loss,
remote alert, pre-alarm and post-alarm seconds.
PTZ Configures PTZ settings.
User Configures users, passwords, and access privileges.
Systems Configures system settings including system date and time, audio output,
device name, RS-485 settings, RS-232 settings, firmware upgrade, hard
drive settings, boot log, and shutdown.
Help Provides reference information to the various toolbars, menus, and keys
within the interface.