Interlogix NVR 50 Quick Start - Manual (Page 5)

TVN 50 Quick Start Guide 3 : EN
Item Name Description
8. Direction The DIRECTION buttons are used to navigate between different
fields and items in menus.
In the Playback mode, the left and right button is used to speed up
and slow down recorded video.
In Live View mode, these buttons can be used to cycle through
channels.
In PTZ control mode, it can control the movement of the PTZ camera.
Enter button The ENTER button is used to confirm selection in any of the menu
modes.
In single-frame Playback mode, pressing the button will advance the
video by a single frame.
9. PTZ buttons Zoom: Use + and – for digital zoom.
Preset: Call up preprogrammed preset positions.
Tour: Call up preprogrammed shadow tours.
10. Archive button Press once to enter quick archive mode. Press twice to start
archiving. Indicator blinks green when data is being written to backup
device.
Package contents
The TruVision NVR 50 (model TVN 50) is
shipped with the following items:
• IR (infrared) remote control
• Two AAA batteries for the remote
control
• AC power cords (US, Europe, UK)
• USB mouse
• NVR
• CD with software and manuals
• TruVision NVR 50 Quick Start Guide
• TruVision NVR 50 User Manual (on CD)
Installation environment
Refer to the user manual for detailed
information, but observe these important
requirements:
• Place the unit in a secure location.
• Ensure that the unit is in a well-
ventilated area.
• Do not expose the unit to rain or
moisture.
Quick install
Recommended steps for setting up the
NVR:
1. Connect all the devices required to the
back panel of the TVN 50. See Figure 1
on page 1.
Basic connections:
Connect monitor A to the BNC, VGA or
HDMI output. Connect the mouse to the
USB port in the front panel.
Optional connections:
All the other connections shown are
optional and depend upon installation
requirements.
2. Connect the power cord to the unit and
turn on the power.
3. Set up the unit with the required
settings using the setup wizard.
First-time use
The TVN 50 has an express installation
wizard that lets you easily configure basic
NVR settings when first used. It configures
all cameras simultaneously. The
configuration can then be customized as
required.
By default, the setup wizard will start once