Interlogix Director Network Security Key - Manual (Page 2)

21-0391Erev1.1 Director Network Security Key Installation Instructions 8 / 2008
© 2008 CSG Security Inc. / Sécurité CSG Inc. Page 2 of 2
VEREX Technology
5201 Explorer Drive, Mississauga, Ont., Canada. L4W-4H1
[email protected] +1 905.206.8434 | [email protected] +1 905.206.8436 | Fax: +1 905.629.4970
www.verextech.com | +1 877.249.9993
Exit: Will close the Activity Screen but not the License Mgr. The License Mgr icon will still appear in the system tray indicating
it is active.
8. Install the Director Software on the Virtual or no USB computer. During the Director Software installation, a prompt will
appear to install the security key on the Director PC. Acknowledge this prompt. If a message is returned that the Director
can not find its Security Key, try the following.
9. The Director may need to know where to look on the network for the Actual PC that has the Security Key. Along with the
License Mgr program, there will be a file called “Nethasp.ini” in the HaspHL License Manager folder on the Director
Installation disk.
10. Copy the Nethasp.ini file to the Virtual Machine and put it in the C:\windows\system32 directory so that Director can find
the file easily.
11. Double click on the Nethasp.ini file and edit the file where it displays: NH_SERVER_ADDR = xxx.xxx.xxx.xxx – change
the xs to the IP address of the PC which has the Security Key plugged in and the License Mgr is working on.
12. Acknowledge the Director key prompt back on the Virtual or no USB PC. Director will first check for the Security Key on
the local PC and then it will start checking the system32 directory for the “.ini” file, then the network for the Actual PC that
has the key.
13. When Director locates the key on the Actual PC it will resume installing itself.