ISP Technologies THETA PRE AMP PEDAL - Manual (Page 2)

INTRODUCTION
Congratulations on your purchase of the THETA Preamp Pedal. The THETA Preamp Pedal was
designed to provide the maximum possible over the top performance. With a front end
preamplifier, a full complement of pre and post gain tone, over the top screaming gain, more
than any preamplifier or pedal available plus a full Decimator II G-String noise reduction system.
The THETA Preamp Pedal can be used as a dual channel preamplifier with both a clean preamp
and distortion channel or with the front end preamp overdriving the distortion for massive high
gain. Both Clean and Distort sections provide noise reduction with a full implementation of
Decimator II G-String noise reduction allowing the use of extremely high gain with absolutely no
noise. The THETA Preamp Pedal also incorporates ISP proprietary “dynamic gain modulation”
providing a dynamic feel similar to a tube amplifier with a tube rectifier. Please read this
manual carefully for a through explanation of the THETA Preamp Pedal and its functions.
IMPORTANT SAFTEY INSTRUCTIONS
Please read the following very carefully before operating this unit

Read ALL instructions carefully before using this unit. Keep these instructions for future reference.
Heed all warnings and follow all instructions.

Do not use this unit near water, in the rain, or where there is moisture. If this warning is ignored a
serious electrical shock or death may occur.

Do not attempt to service this unit. No user serviceable parts inside. Refer servicing to qualified,
ISP approved personnel. Servicing is required when the unit is damaged in any way, such as power
adaptor is damaged, liquid has been spilled into the unit, the unit has been exposed to rain or
moisture, does not operate normally, or has been dropped.

Care should be taken to avoid to spill any foreign objects or liquid into this unit. Avoid exposure of
this equipment to dripping or splashing and ensure that no objects filled with liquid, such as vases,
are placed on the equipment.

Only use accessories or attachments that are specified by the manufacturer.

Failure to follow these instructions may void the warranty.
NO UER SERVICABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED ISP
TECHNOLOGIES SERVICE PERSONNELL.
The lightning bolt triangle is used to alert the user to the risk of electric shock.
The exclamation point triangle is used to alert the user to important operating or
maintenance instructions.
POWER REQUIREMENTS
This unit requires the connection of the external AC Power Adaptor to a 120 volt AC outlet.
Do not attempt to connect this unit to any power source other than the specified 120VAC.
The THETA Preamp Pedal will typically draw approximately .5 amps of current.