Specifications – ISP Technologies ProWedge 212 User Manual
Page 7
SPECIFICATIONS
Configuration:
2-way
LF Drivers:
2 x 12 inch, high sensitivity, neo magnet, water resistant cones.
HF Drivers:
2 x 2.6 inch compression, 1.4 inch throat, neo magnet, polymer
diaphragm, on multiple-aperture waveguide.
Coverage:
60 H x 60 V
Frequency Resp.:
60 Hz to 16 kHz
Maximum peak SPL:
137 dB @ 1m
Construction:
Baltic Birch Plywood, foam-backed powder coated heavy duty
steel grille.
Dimensions:
27.2” W x 16.9” H x 21” D
Weight:
80 lbs.
Amplifier:
900 W RMS, 3 channels
high current DCAT, fan cooled.
Power Required:
5.5 amps x 120 VAC.
Power Connections
: Powercon Input, Powercon Thru.
Audio Connections
: Female XLR Input, Male XLR Thru. Electronically balanced, 20k
ohm differential between pins 2 and 3. Pin 2 hot.
Crossover:
Built-in line-level electronic, 1 KHz nominal, 4
th
order.