ISP Technologies VMAX 150C User Manual
Page 7
Note: when using the line input(s) on the VMAX keep the Microphone input level controls at
minimum to avoid any increase in input gain noise.
It is recommended to match the input
sensitivity of the VMAX speaker with the output level of the external mixer. Increasing the gain
of the VMAX input may cause clipping of the input section of the VMAX speakers. It is
recommended to start with the gain at minimum and increase the VMAX input sensitivity as
needed.
FUSE REPLACEMENT
1. Use a small screwdriver as shown to slide the fuse cover out
from the power inlet module. The fuse can be found inside
the fuse cover module after it is pulled out.
NOTE: A SMALL COMPARTMENT IS ALSO PROVIDED WITHIN THE FUSE COVER MODULE
FOR STORING A SPARE FUSE.
2. After replacing the fuse with another of identical
specifications, push the fuse cover module fully back into
place, ensuring that the fuse has snapped onto the fuse
holder inside the power inlet module.