Chief Manufacturing FTR Series - Manual (Page 3)

Installation Instructions Model: FTR Series
3
TOOLS REQUIRED FOR INSTALLATION
• Drill
• 1/8" drill bit (wood stud installation)
• 3/8" drill bit (drywall installation)
• Hammer (drywall installation)
• Phillips screwdriver, #2
NOTE: Other tools may be required depending on your
method of installation.
PARTS
After unpacking carton, inspect and verify contents (See
Figure 1). If any listed parts are missing or damaged,
contact Chief Customer Service at 1-800-582-6480.
Table 1: Parts
Item Description Qty
10 PLATE, Wall 2
20 ANCHOR, Hollow Wall, #10-24 4
30 WASHER, Flat, Standard Machine Screw, #10 4
40 SCREW, Phillips Pan Head Sheet Metal,
#10 x 2-1/2" 2
Figure 1: Parts
(20)
(30)
(10)
(40)