ISP Technologies SA118 User Manual
Page 4
4
PLACEMENT
The SA118 is designed to sit directly on the floor or stage. Do not position or mount the
cabinet where it can tip over and fall on someone. Do not attempt to mount the cabinet on
speaker stands. Do not attempt to ‘fly’ (suspend by cables, chains, ropes, etc.) the cabinet.
It was not designed for flying. Position it only on a flat, stable surface where it is not in
danger of tipping over.
Also, note that the placement of the cabinet relative to floors and walls will affect the low
frequency response. Placing it closer to the floor and walls will reinforce the low frequency
response. Also, make sure that adequate space (at least 6 inches) is left behind the
cabinet for airflow over the internal amplifier heatsink.
A pole mount socket is provided on the top of the SA118 for mounting one of ISP
Technologies Active Series Tripower 12 or Tripower 12XL three-way speakers. A standard
1-3/8 inch pole is required for mounting the Tripower speakers. To avoid accidents and
insure stability this pole length should not exceed 2 feet in length.