ISP Technologies HDA 1003 Remote Amplifier - Manual (Page 4)

BACK PANEL
1. Primary Fuse – This fuse holder contains the main fuse for this system. Follow
instructions of cabinet when deciding what power level fuse to use. Turn
counter-clockwise to access.
2. Powercon Connector Jack – This module provides a connection for the power
cord.
3. Speakon Connector Jack – Connect to any ISP corresponding balanced
speakon input.
4. Level Control Knob - This control determines the overall input level of the
signal.
5. Balanced XLR Input - This female XLR connector provides an input for
balanced line level signal source.
6. Balanced XLR Output - This male XLR connector provides a balanced loop
through for connecting to additional external powered amplifiers.