ISP Technologies SM 2110 - Manual (Page 8)

HDDS 2110 SPECIFICATIONS
Speaker Type: 2-way active
Low Frequency:
10″ cone
High Frequency: 1.3″ titanium diaphragm compression driver
Crossover: 4th order LR high pass and low pass
High Pass Filter: Switchable 40 Hz or 90 Hz
– for use with a subwoofer
Maximum SPL: 122 dB peak, 116 dB long-term
Nominal Coverage Angle: 80 deg. H x 70 deg. V
Frequency Range (-10 dB): 42 Hz
– 20 kHz
Frequency Response (+-3 dB): 50 Hz – 19 kHz
Audio Input: Balanced 30k input impedance
Amplifier Power: 180 WRMS continuous LF, 40 WRMS continuous HF
Backplate: Dual RJ45 Connectors, Remote level input control, High Pass filter selector
switch
Size: 20.2″ H x 12.2″ W x 12.25″ D
Weight: 25 lbs
Enclosure: Baltic Birch Plywood with rubberized polyurethane finish
Grille: Powder Coated Steel
Mounting Hardware: Included wall mounting bracket