Philips Magnavox 7P5441C199 - Manual (Page 47)

S electing the P icture S ource for PIP
PIP SOI R C i :
picture for the PIP window
can come through either the
ANT(enna) A! В Inputs or the AUX
11213 Inputs (on the front and rear
of the TV). PIP Picture Source
simply tells the TV which one of
these sources it is to show in the
PIP window.
LBEOIWJ
Select PIP SOURCE control.
With FEATURES MENU (4 of 5)
on screen, move the RED highlight
with the MENU (M) t b u t t o n s .
Then press the MENU button.
Press the MENU AT and
MENU (M) buttons to highlight
and select the desired (u^) PIP
Picture Source.
ANT A or B- for a picture signal
coming from either the ANT(enna)
A or B Input plug on the TV.
Note: The remote control’s
button can also be used to quickly
swap between the picture sources
for the TV’s Main screen and the
PIP window.
AUX 1- for a picture signal
coming from die AUX IN 1 Video
Input jack on the rear of the TV.
AUX 2- for a picture signal
coming from die AUX IN 2 Video
Input jack on the rear of the TV.
AUX 3- for a picture signal coming
from the Video Input jack on the
front of the TV.
Press the STATUS button to
clear the screen.
S m a r i H k i . p
Remember, the PIP
% window will be blank unless
a signal is connected to the
selected PIP Picture Source (ANT
B, AUX 1/23/, etc.) on the rear of
the set.
If you see the same picture on the
main screen and in the PIP
window, you may have the Main
Screen and PIP window set to the
same video input source.
' FEATURE MENU ■
CABLE
TUNING
1 'Ф
■ FEATURE MENU ‘
SET CLOCK
& ON TIMER
SLEEP
TIMER
HALF HOUR
REMINDER
CHANNEL
DISPLAY
i 1
I MORE..
'S'dF'l
■ FEATURE MENU ■
= FEATURE MENU ■
. \ . I
PIP i' PIP 1
SOURCE L SIZE 1
47