Campbell Hausfeld IN730200AV - Manual

2
Attach air hose
to regulator outlet.
Adjust regulator
knob so outlet
pressure is between
70 psi and 120 psi.
Close pressure
regulator, Turn ON
compressor and
Allow tank to reach
maximum pressure.
NOTICE: To operate this tool you will need
at least a 1 gallon compressor.
Attach coupler on air
hose to nailer inlet.
4
Straight Finish Nailer
CHN70500
Setup Like a Pro
Easy Setup Guide
Projects are easier with
Campbell Hausfeld products.
Thank you for deciding to purchase a Campbell
Hausfeld product. We are dedicated to providing
tools that help you to complete your projects
Like a Pro
.
Load fasteners. See manual for further information regarding
length and type of fasteners.
3
© 2010 Campbell Hausfeld/Scott Fetzer
IN730200AV 2/10
70
psi
120
psi
1
Pull Pull pusher back until it pusher back until it
latches. latches.
Load nails. Press pusher latch button and allow
pusher to ride against nails.
Nail
Pusher
Latch
Button
le
Setup Like a Pro
CHN70500 — Air Powered Straight Finish Nailer
Visit us at chpower.com