Philips FW620C - Manual (Page 7)

INSTALLATION REMOTE CONTROL
[Speaker connections Remote control functions
One of the two wires of a speaker cable is marked, e.g. with a
color or rib.
1 The marked wire should be connected to the red terminal and the
unmarked one to the black terminal.
2 Make sure that the color combination of wire and terminal is the
same for each speaker.
Positioning of the speakers
' You will find the best speaker position by experimenting.
Placing the speakers on the floor will increase the bass response.
Placing the speakers behind curtains, furniture etc. will reduce
treble response and the stereo effect.
You will obtain the ideal position when the two front speakers and
the listening position build an equilateral triangle and the speakers
are at ear level.
Always first select the desired sound
source and then press the required
function button (for example CD + PLAY ►
or TAPE + PLAY ►.
Notes:
- The remote control remains tuned to the
selected sound source until another sound
source button on the remote control Is
pressed.
- The corresponding LED indicator above
the sound source buttons on the system
flashes when its source Is operated by the
remote control.
- You can only control TV/VCR If this unit
uses the RC-5 remote control system.
- Pressing TV/VCR will first switch on the
TV set and after one second the whole
audio set
If TV/VCR is selected, the STANDBY button
will first switch the TV set to standby and
after one second the whole set
- Pressing TV/VCR for more than one
seconds will select the external source
that is connected via the LINE IN jacks.
TUNER CO o o o
TAPE1 TAP62 StOe o o o
ILUEOU TV/VCR OISPIAY o o o
SHUFFlfi
DBS o O o
.¡2
"5)
s
UJ
STANDBY .......................to switch the system to the standby mode
TUNER - CD - TAPE 1 - TAPE 2 - M.MEDIA - TV/VCR
sound source selection buttons
DISC......................... CD:to select a CD (1-7) - only applicable for
version with CD changer
SIDE ................................... TAPE 1 or2:to select the front or back side of
the tape (FRONT/BACK)
DISPLAY ..........................to change the type of display information
for the selected source
DBB ....................................to increase the bass level
SHUFFLE ......................... CD:to to switch on/off the shuffle feature
DSC .................................... to select the desired sound setting:
npTTi»/»ni J icrp fcrrp
VOLUME - +................. to adjust the volume level of the audio system
PLAY ►........................... CD, TAPE 1 or2, VCR:\o start playback
M PREV./NEXT M....T[//V£S;to select a radio preset station
CD; to select the beginning of the current/
previous or a subsequent track
TV: to select a TV preset station
STOP ■...........................CD, TAPE 1 or2, VCR: to stop playback
◄◄ ►►.............................TUNER:to tune to a radio station
CD:to search a particular passage
TAPE 1 or 2, VCR: to fast forward or to reverse
the tape
TV-to adjust the volume
PAUSE II......................... CD, TAPE 1 or2, VCR: to temporary
interrupt playback
7