Philips VCM8175/00T User Manual
Page 6
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Table of contents
Page
Introduction................
Installation..................
Sound
Position
Protective cover
Video out
The lens
Cable
Tips for maintenance-
introduction
Your new CCD camera is specially developed for use with a special
observation system monitor.
It features a sensitive microphone thus registering both images and
sound via the monitor.
Installation
Warning:
When a camera or accessory is connected or disconnected,
the monitor should always be disconnected from the mains
supply.
Only operating the stand-by key is not sufficient.
When the mains supply is connected, all camera lines are scanned.
The monitor uses this to register the camera configuration of the
system and to check whether any modifications have been made.