Cabletron Systems DMS-100 - Manual (Page 139)

Appendix C: Using FTP 139
DMS-100 Family EIU User Guide TELECOM12
Change the working directory on the
workstation CM> cd ‘path_name’
where
path_name is a valid path from the current working
directory on the workstation
Use single quotation marks only if the directory name is in
lowercase.
Change the working directory on the
DMS CM> lcd ‘/PATH_NAME’
where
path_name is a valid path from the current working
directory
Display the working directory on the
DMS CM> lcd
List the directory contents on the
workstation CM> ls
Turn off automatic record length
detection CM>autolrecl off
Turn on automatic record length
detection CM>autolrecl on
Get an ASCII file from the workstation CM> ascii
CM> get ‘file_name1.txt132’
where
filename is the name of the file on the workstation
If filename is in lowercase, use single quotation marks
around the name.
The above command sequence
• sets the transfer type to ASCII
• puts the file in the current directory of the DMS
Table 35 FTP operations reference: DMS to workstation
Action Command sequence
(Sheet 2 of 3)