CDA CI920 - Manual (Page 5)

Use And Controls
A. The timer - Turn the timer knob clockwise until the required programme
around the timer knob is selected.
B. Heat setting - Select gentle or intensive heat as recommended on
the control panel
C. Start - Press the start button after selecting the required drying time.
• Sort out the clothes into groups of similar fabrics and colours. Check the care label inside the garment. We suggest
that a fabric conditioner be used to reduce static electricity. Delicate articles e.g. tights should be placed inside a
pillowcase. It is better to dry small and large articles together.
• Open the door.
• Load clothes loosely into the drum.
• Load sheets first starting with one corner.
• Close the door.
• Dry your hands.
• Check the timer is in the’0’ position.
• Switch on the machine.
• Select correct heat position.
• Set the timer to the correct position (See programme around the timer on fascia panel).
• Press the start button.
• The drum will now begin to rotate and will stop automatically when the timer reaches the ‘0’ position.
• Once the clothes are removed, clean the filter
• Switch off the electricity supply.
fig. 1
3
80 - 120 Mins
60 - 100 Mins
20 - 40 Mins
20 - 40 Mins
80 - 120 Mins
40 - 60 Mins
Cotton Dry
Cotton Damp Dry
Heavy Synthetics
Light Synthetics
Linens
Polyester Cotton
TIME SETTING
HEAT SETTINGS START
80 - 120 Mins
60 - 100 Mins
20 - 40 Mins
20 - 40 Mins
80 - 120 Mins
40 - 60 M
Cotton Dry
Cotton Damp Dry
Heavy Synthetics
Light Synthetics
Linens
Polyester Cotton