Installing the camera, Maintenance tips – Philips VCM 6110/00T User Manual
Page 6
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Warning:
Do not touch the surface of the lens. This could damage the
delicate coating on the surface of the lens. If the lens has to be
cleaned, use special lens cleaning tissue, available at any good
camera store.
Installing the camera
It is advisable to install the camera first and connect it to the
monitor on the spot. It will allow you to properly aim the camera at
the area you want covered while checking the results on the
monitor. When satisfied you can place the monitor in its permanent
position.
The camera is provided with a mounting hole with 1/4“ Whitworth
thread. (B) fig. 1, which makes it possible to mount it on any
camera tripod.
Maintenance tips
Warning:
Do not expose the camera to rain or moisture, or try to
operate it in wet areas. Do not operate the camera if it
gets wet.
For outdoor applications you should use a protective housing to
shield the camera from rain and snow.
Cleaning. You may clean the exterior of the camera with a damp
and lint-free cloth or chamois. Do not use strong or abrasive
detergents. In case the dirt is hard to remove, use mild detergent
and wipe gently.