Philips 48UP910 User Manual

Page 8

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

. . .

before calling service

Symptoms

Items to Check and Actions to follow

TV not respond­

ing to remote

control

•

Check batteries and replace them if necessary.

•

Clean the remote control sensor lens on the TV.

•

Operating range between TV and remote control
should not be more than 6 metres.

NICAM sound
distortion
(crackling noise)

This could be due to the antenna siting or reflected

signal.

• Switch over to the "NICAM Mono" mode by pressing

the I-n button.

Blue or red

colour appears
around the
edges of picture

The convergence of the picture has probably drifted.

• Select the "FEATURES" menu and select

"Convergence." Adjust accordingly.

No On-Screen-
Display

• Check that you are not in the "Teletext" mode or

"Subtitle Txt" mode. To see the On-Screen-Display,
exit from this mode.

Advertising