Philips VSS2285/00T - Manual (Page 4)

Instructions for use
(Change a main plug (U.K. only)
If the fitted plug is not suitable for your socket
outlets, it should be removed and an appropriate
plug fitted in its place.
Cut the main plug from the lead. Strip the
sheathing so the wires will become free for the
necessary length to connect the UK-main plug (not
supplied).
The wires in the main lead are coloured according
to the following code:
BLUE - NEUTRAL
BROWN - LIVE
If the mains plug (or adapter) contains a fuse, the
value of this fuse should be 3 Amp. Alternatively, if
another type of plug (not fused) is used, the fuse
at the distribution board should not be greater than
5 Amp. If the colours of the wires in the mains lead
do not correspond with the coloured markings
identifying the terminals, proceed as follows:
The BLUE wire should be connected to the
terminal marked "N" or coloured black.
The BROWN wire should be connected to the
terminal marked “L" or coloured red.
Before replacing the plug cover, make sure that
the cord grip is clamped over the sheath of the
lead - not simply over the two wires.
Anmerkung
Diese ausrustung ist nicht für industriellen einsatz
vorgesehn.
Das Gerät ist für den Dauerbetrieb bestimmt.