Audio out, Front speakers, Subwoofer out – Philips MX1055D37 User Manual
Page 19: Surround speakers, Analog audio connections, 10 c
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
© AUDIO OUT
For
connecting
analog
(Left/Right)
signals
to
external
recording devices such as VCR or Tape Recorder for
recording.
® FRONT SPEAKERS
Connect the left front speaker to the “L” jacks, the
right front speaker to the “R” jacks and center speaker
to the “C” jacks. Connect the colored (marked) wire
to ” + " and the black (unmarked) wire to " —".
® SUBWOOFER OUT
Connect this jack to the AUDIO INPUT jack of the
powered subwoofer.
After completing all the connections, connect the AC
power cord of the player and subwoofer to the wall
outlet. To switch on the subwoofer, rotate the
VOLUME
knob at the front panel of subwoofer
clockwise until you hear a click.
Notes:
- To prevent damage to circuits, never short<ircuit the
positive and negative speaker output jacks,
- Do not connect more than one speaker to any one pair of
+ /~
speaker Jacks,
- Do
not connect speakers with an impedance lower than
the speakers supplied. Please refer to die SPECIFICATIONS
section of this manual.
® SURROUND SPEAKERS
Connect the left surround speaker to "SL” jacks and
the right surround speaker to “SR" jacks. Connect the
colored (marked) wire to ” + " and the black
(unmarked) wire to " —
Analog Audio Connections
10 C
onnections