Philips 43PP7445 - Manual (Page 4)

Installing the TV
O The major benefit of this projection television is its large
viewing screen. To see the large screen at Its best, test various
locations In the room to find the optimal spot for viewing.
Be sure to allow a minimum of 15 cm of space around the
TV.
To avoid cabinet warping, cabinet colour changes, and
Increased chance of set failure, do not place the TV where
temperatures can become excessively hot - for example. In
direct sunlight or near a heating appliance.
Magnetic fields, such as those of external speakers, may cause
the picture to distort If the speakers are placed too close to
the television. Move the magnetic field source away from the
TV until there Is no picture distortion.
Q Insert the aerial plug firmly Into the ANTENNA IN 75Q
socket at the rear of the set.
o Insert the mains plug In the wall socket. Refer to the back
of the TV set for the correct operation voltage. Consult
your local dealer If your main supply Is different. To prevent
damaging the mains (AC) cord, which could cause hazard, do
not place the TV on the cord.
O Remove the cover of the battery compartment on the remote
control. Insert the two batteries supplied (Type R6-1.5V).
The batteries supplied do not contain the heavy metals
mercury and cadmium. Nevertheless, In many countries
exhausted batteries may not be disposed of with your
household waste. Please check on how to dispose of
exhausted batteries according to local regulations.
See the battery caution statement on page 2.
Note; This remote control functions with TVs that use the RC5
signalling standard.
0 Switch the TV on: Press the mains power switch on the front
of the TV. If the Standby key Is lighted, press the CH +/- keys,
digit keys or the Power key on the remote control. Or press
the Standby or CHANNEL keys on the front of the TV.
Do not place
the TV in direct
sunlight or
15 cm near a heating
^^ appliance.
ANTENNA IN 75Q
Socket on the rear of
the TV
43.50PP7445_DFU_Eng_69.indd 4 2005-01-20 10:09:44 AM