Philips MX5471 - Manual (Page 33)

U sing the A udio A^ ideo O utput J acks ( continued )
ILJ
AUDIOA'IDEO OUTPUTS
T 'he AudioA^ideo Output jacks
on the TV can be used to
record TV programs on VCRs
which have Audio/Video Input
jacks.
To record TV programs by using
the Audio/Video jacks on the TV:
C beginj
<1> Connect the VIDEO OUT jack
from the TV to the VIDEO IN jack
on the VCR.
<|> Connect the AUDIO OUT
jacks R(ight) and L(eft) from the
TV to the AUDIO IN jacks on the
VCR.
<S>
Select the "ANTENNA"
PICTURE SOURCE control on
the TV.
With the FEATURES MENU on
screen, move the RED highlight
with the MENU (M) ^ ► buttons.
Then press the MENU button.
Select the channel on the TV that
you want to record.
<i> Turn the VCR ON. Put a
cassette tape in the unit and place
the VCR in the RECORD mode.
S mart H fxp
Remember, If the VCR
•has an INPUT SELECTOR
switch, place it in the LINE or
CAMERA position.
Unattended Timer Recordings
with a VCR are possible, but not
recommended with this
connection since the TV must be
left ON for the VCR to record.
PICTURE AND SOUND BEING
RECORDED ON VCR.
33 - IB7905 E001