ClearSounds CSC600 - Manual (Page 10)

10 – ENGLISH
3 Using the keypad, dial the number you would like to save, including “1” and
the area code (if applicable).
4 Press and hold down one of the Priority or Memory Dial buttons (M1 – M5)
located on bottom of the phone for approximately 1-2 seconds. Each button
can be programmed (or reprogrammed using the same procedure) for a
phone number.
5 Hold the button until the screen displays <<SAVE OK>>
6 To register your stored phone numbers, use the phonebook insert card
located under the base.
NOTE: Numbers will be lost if the phone is not receiving any power,
either through the phone line, batteries, or AC adapter during a,
power outage or if you disconnect the phone. Entering a new number
in the same location will automatically erase the previous number.
USING AUDIO AND TELEPHONE HEADSET ACCESSORY JACKS
Your CSC600 Amplified Phone is equipped with both an Audio
and Telephone Headset Jack, providing total flexibility and multi-
functionality. Both the Audio & Headset jacks are amplified, allowing
you to adjust both the tone and volume. These jacks accommodate
a variety of optional accessories including Neckloops, Headphones,
Earbuds, Silhouettes, Cellular Accessories and Cochlear Patchcord*
(not included).
*Caution: Before plugging any cord into your Cochlear processor, you
should consult with your implant manufacturer.
Audio/Neckloop Jack
Using the 3.5mm stereo/mono jack allows you to listen through
your Neckloop or Headset while speaking into the handset or
speakerphone.
Telephone Headset Jack
Using the 2.5mm stereo jack that can accommodate many hands-
free headsets allows for total hands-free operation as you listen and
speak through your hands-free headset.
Shaker
Yo ur ClearSounds ® CSC600 Telephone incorporates several options
to alert you that the phone is ringing. The loud, adjustable Ringer as
well as the bright Strobe and optional Bed Shaker or any combination
of these allow you to customize the phone to fit your needs.
Your CSC600 Phone is equipped with a bright STROBE light, which
flashes a very bright strobe when the phone rings. It’s almost
impossible to miss telephone calls when you select the Strobe
Ringer. If you purchased the optional Bed Shaker, simply plug it