Campbell Hausfeld IN703700AV - Manual (Page 6)

6
Operating Instructions
NB003006
www.chpower.com
User - Maintenance
Instructions (Continued)
TECHNICAL SERvICE
Please call our Tool Hotline at 1-800-
543-6400 with any questions regarding
the operation or repair of this tool or
for additional copies of this manual.
FASTENER AND REPLACEMENT
PARTS
Use only genuine
Campbell Hausfeld
18 gauge fasteners (or equivalent - see
Fastener Interchange Information).
Tool performance, safety and durability
could be reduced if improper fasteners
are used. When ordering replacement
parts or fasteners, specify by part
number.
TOOL REPAIR
Only qualified personnel should repair
the tool and they should use genuine
Campbell Hausfeld replacement parts
and accessories, or parts and accessories
which perform equivalently.
ASSEMBLY PROCEDURE FOR SEALS
When repairing a tool, the internal
parts must be cleaned and lubricated.
Parker O-lube or equivalent must be
used on all o-rings. Each o-ring must be
coated with O-lube before assembling.
A small amount of oil must be used on
all moving surfaces and pivots. After
reassembling, a few drops of 30W
non-detergent oil or equivalent, must
be added through the air line before
testing.
STORAGE
The tool should be stored in a cool dry
place.
Fasteners
The following Campbell Hausfeld finishing nails are available at local retail stores. If you need help locating any item,
call customer service at 1-800-543-6400. Campbell Hausfeld nails meet or exceed ASTM Standard F1667.
Model Length Shank Gauge Finish Head Collation
Nails Per
Stick
Nails Per
Box
FB001600 5/8 inch 18 Gauge Galvanized Brad /Brown Adhesive 100 5000
FB002000 3/4 inch 18 Gauge Galvanized Brad /Brown Adhesive 100 5000
FB002500 1 inch 18 Gauge Galvanized Brad /Brown Adhesive 100 5000
FB003000 1-1/4 inch 18 Gauge Galvanized Brad /Brown Adhesive 100 5000
FB180016 5/8 inch 18 Gauge Galvanized Brad /Brown Adhesive 100 1000
FB180025 1 inch 18 Gauge Galvanized Brad /Brown Adhesive 100 1000
FB180030 1-1/4 inch 18 Gauge Galvanized Brad /Brown Adhesive 100 1000
Interchange Information
Can use brad nails from the following branded air-powered brad nailers: Bostitch ® BT125SK-2, Campbell Hausfeld ® NB0030,
DeWalt ® D51238K, Paslode ® T125-F18, Porter Cable ® BN125, and Senco Finish Pro ® 15.