Picture freeze function, No show function, P-timer function – Canon LV-7575 User Manual

Page 23: Sound adjustment, No show function picture freeze function, Basic operation

Advertising
background image

23

Press the FREEZE button on the remote control unit to freeze the picture on the screen. To cancel the FREEZE
function, press the FREEZE button again or press any other button.

Press the NO SHOW button on the remote control unit to
black out the image. To restore to normal, press the NO
SHOW button again or press any other button.

NO SHOW FUNCTION

PICTURE FREEZE FUNCTION

“No show” disappears after 4 seconds.

1

2

Press the MENU button to display the On-Screen Menu.
Press the POINT LEFT/RIGHT buttons to move the red
frame pointer to the SOUND Menu icon.

Volume

Press the VOLUME (+/–) buttons on the top control or on the
remote control unit to adjust the volume. A Volume dialog box
appears on the screen for a few seconds.
Press the VOLUME (+) button to increase the volume; press
the VOLUME (–) button to decrease the volume.

Mute

Press the MUTE button on the remote control unit to turn off
the sound. To restore the sound to its previous level, press the
MUTE button again or press the VOLUME (+/–) buttons.

To increase the volume, press the POINT RIGHT button; to decrease
the volume, press the POINT LEFT button.

Press the POINT UP/DOWN buttons to move the red
frame pointer to the desired item, and then press the OK
button.

SOUND ADJUSTMENT

DIRECT OPERATION

MENU OPERATION

Volume

Indicates an approximate level of the volume.

Press the MUTE button to set
the Mute function On or Off.

The Volume dialog box disappears after 4 seconds.

SOUND MENU

Press the POINT LEFT/RIGHT buttons to turn off the sound. The
Dialog box display is changed to “On” and the sound is turned off. To
restore the sound to its previous level, press the POINT LEFT/RIGHT
buttons again.

Mute

BASIC OPERATION

Closes the SOUND Menu

Indicates an approximate
level of the volume.

SOUND Menu icon

Press the P-TIMER button on the remote control unit. A Timer
display “00 : 00” appears on the screen and starts to count
time (00 : 00–59 : 59).
To stop the P-TIMER, press the P-TIMER button. Press the P-
TIMER button again to cancel the P-TIMER function.

P-TIMER FUNCTION

Built-in SP.

Press the POINT LEFT/RIGHT buttons to switch the built-in speaker
On or Off.

Advertising