Cary Audio Design 7.25 - Manual (Page 10)

CONTROLS AND DISPLAYS
FRONT PANEL
POWER BUTTON
 The Power Button performs no function when the amplifier is powered off with
the rear panel Master Power Switch.
 When the rear panel Master Power Switch is powered on, the Model 7.250 is in
Standby mode. Pressing the Power Button when the rear panel master panel switch
is powered on will activate the power amplifier. When the Model 7.250 is activated,
the front panel display lights blue. The display can then be controlled by a rear
panel dimmer switch (see Rear Panel) in three modes – High, Off and Low.
Note :
When the status of the Model 7.250 changes, relay checks may be audible. This is normal
operation.
9