Canon i 475D - Manual (Page 7)

5
5 5 5 5 Raise the lock lever.
Do not touch internal parts other than the lock lever.
6 6 6 6 Remove the protective cap from the
print head.
7 7 7 7 Place the print head in the holder.
8 8 8 8 Lock the print head into place by
lowering the lever.
Do not touch the lock lever once the print head has been
installed.
• Do not touch the print
head nozzles or
electrical contacts.
• Do not attempt to
reattach the protective
cap once it has been
removed.
lock lever
electrical
contacts print head
nozzles
print head