Char-Broil COMMERICAL 463248708 - Manual (Page 18)

9 Insert tabs on left sideburner shelf assembly into rectangular slots in side of
side pane show (A). Attach rear of shelf using
one 1/4-20x3/4” screw, 7mm lock washer, and 7mm flat washer in upper hole. Use one 1/4-20x1½” screw, 7mm lock
washer, and
7mm flat washer in lower hole. Attach front of shelf and fascia using three 1/4-20x3/4” screws, 7mm lock
washers, and
7mm flat washers. Now you may fully tighten lower screws on upper back panel.
Remove the screw shown (
B), then add one large flat washer, and re-install the screw shown(C).
Fascia, left sideburner shelf
Left sideburner shelf
Tabs
into
holes
1/4-20x1½” screw
1/4-20x3/4”
screw
7mm lock
washer
7mm flat washer
7mm lock
washer
7mm flat
washer
1/4-20x3/4”
screw
7mm lock
washer
7mm flat
washer
C B
Remove This Screw Large Flat Washer
View Behind Left Fascia View Behind Left Fascia
A
18 • 463248708