Crane & Co. EE- 5200 W / B - Manual (Page 9)

8
How to Clean Humidifier Exteriors
1. DO NOT IMMERSE THE BASE IN WATER OR ANY OTHER LIQUID an electric shock
may result or the humidifier may be damaged.
2. Wipe all exteriors surfaces of the base with a soft, dry cloth.
End of Season Maintenance
1. Follow above weekly cleaning procedure at the end of the humidification season,
or when the humidifier will not be used for several days, being sure to dry all
parts. Allow the water tank to thoroughly dry before storage. DO NOT store with
water inside any part of the humidifier.
2. Save original box for easy storage.
3. Leave tank cap partially loosed during storage to prevent tank cap and gasket
from sticking together. This will prolong the life of the gasket.
4.
Store humidifier in a cool dry location.
Cleaning Water Level Sensor
To clean the water level senor unscrew (see Fig.11) the plastic cap on the pin by
pulling it up (see Fig.12). Remove the water sensor and cap and clean by wiping the
parts with a soft damp cloth. Replace the parts by first putting the water sensor onto the
pin and then pressing the plastic cap on the end of the pin to secure the sensor. Do not
use excessive force.
Fig. 11 Fig. 12