Save these instructions, Winter preparations, Winterizing your above ground pool – Intex 32FT X 16FT X 52IN RECTANGULAR POOL SET 2014 User Manual

Page 12

Advertising
background image

119

PO

SAVE THESE INSTRUCTIONS

(119PO) RECTANGULAR ULTRA FRAME POOL ENGLISH 7.5” X 10.3” PANTONE 295U 07/18/2013

English

Page 12

WINTER PREPARATIONS

Winterizing your Above Ground Pool

After usage, you can easily empty and store away your pool in a safe place. You

must drain, disassemble and properly store the pool when the temperature drops

below 41 degrees Fahrenheit (5 degrees Celsius) to prevent ice damage to the pool

and related components. Ice damage can result in sudden liner failure or pool

collapse. Also see the section ‘’How To Drain Your Pool’’.

Should temperatures in your area not drop below 41 degrees Fahrenheit (5 degrees

Celsius), and you choose to leave your pool out, prepare it as follows:

1. Clean the pool water thoroughly. If the type is an Easy Set Pool or an Oval Frame

Pool, make sure that the top ring is properly inflated.

2. Remove the skimmer (if applicable) or any accessories attached to the threaded

strainer connector. Replace strainer grid if necessary. Be sure all accessories parts are

clean and completely dry before storage.

3. Plug the Inlet and Outlet fitting from the inside of the pool with the plug provided

(sizes 16' and below). Close the Inlet and Outlet Plunger Valve (sizes 17' and above).

4. Remove the ladder (if applicable) and store in a safe place. Be sure the ladder is

completely dry before storage.

5. Remove the hoses that connect the pump and filter to the pool.

6. Add the appropriate chemicals for the winter period. Consult your local pool dealer as

to which chemicals you should use and how to use them. This can vary greatly by

region.

7. Cover pool with Intex Pool Cover. IMPORTANT NOTE: INTEX POOL COVER IS NOT

A SAFETY COVER.

8. Clean and drain the pump, filter housing and hoses. Remove and discard the old filter

cartridge. Keep a spare cartridge for the next season.

9. Bring pump and filter parts indoors and store in a safe and dry area, preferably

between 32 degrees Fahrenheit (0 degrees Celsius) and 104 degrees Fahrenheit

(40 degrees Celsius).

Advertising