Ss ee tt uu pp ii nn ss tt rr uu cc tt iioo nn ss – Intex 635T Krystal Clear 2011 User Manual

Page 8

Advertising
background image

107

SAVE THESE INSTRUCTIONS

Page 8

(107) MODEL 635T FILTER PUMP ENGLISH 7.5” X 10.3” PANTONE 295U

07/16/2010

English

SS

EE

TT

UU

PP

II

NN

SS

TT

RR

UU

CC

TT

IIOO

NN

SS

POOL INLET - NOZZLE & PLUNGER VALVE SETUP

1.

In a counter-clockwise motion unscrew
plunger valve union from the threaded
strainer connector (13) (see drawing 5).
Be careful not to lose the step rubber
washer (10). Place the plunger valve on the
ground in a safe place.

2.

In a counter-clockwise motion unscrew the
strainer nut (11) from the threaded
connector (13). Leave the flat washer (12)
on the connector (13).

3.

Install the nozzle and plunger valve at the
upper position of pool inlet. From the inside
of the pool liner insert the connector (13)
into one of the pre-cut holes with the
washer remaining on the connector to be
placed against the inside of the liner wall.

4.

Before assembly, lubricate the threads with
a petroleum jelly. Then, with the flat side of
the strainer nut (11) facing the outside wall
of the liner in a clockwise motion screw the
strainer nut (11) back onto the threaded
connector (13) (see drawing 6).

5.

Finger tighten the adjustable pool inlet
nozzle (14) and the strainer nut (11) onto
the threaded connector (13).

6.

Grasp the plunger valve assembly. Make
sure the step washer (10) is in place.

7.

In a clockwise motion screw the plunger
valve union back onto the threaded
connector (13) (see drawing 7).

8.

Examine the plunger valve to see if the
handle is pushed fully down to the "0/1"
position. If not, then grasp the handle at
the top and push down turning the handle
in a clockwise direction until the plastic
protruding notch anchors in the "0/1"
position. This will prevent water from
flowing out during filling of the pool (see
drawings 8.1 & 8.2)
.

9.

Adjust the direction of the nozzle head
pointing away from the pool outlet for a
better circulation result (see drawing 9).

10. The pool liner is now ready to be filled with

water. Consult the above-ground-pool
owner’s manual for the filling instructions.

5

7

8.1

8.2

INSIDE

LINER

WALL

POOL

9

2

1

1

2

1

2

6

12

13

14

INSIDE

LINER WALL

11

WATER

FLOW

Advertising