Intex CL1110 2013 - Manual (Page 2)

169
PO
(169PO) MULTIFUNCTION LED LIGHT ENGLISH 4.875” X 7.25” 05/28/2012
SAVE THESE INSTRUCTIONS
Page 3
(169PO) MULTIFUNCTION LED LIGHT ENGLISH 4.875” X 7.25” 05/28/2012
SAVE THESE INSTRUCTIONS
Page 4
169
PO
Functions and Operation (Continued)
• Turn-knob: adjust between lantern and flashlight use (See Fig. 2C and 2D):
To Install or Replace the Batteries
1.Push the battery housing to side then pull upward to remove it. (see Fig 3).
2. Remove the battery holder from the battery housing (see Fig 4).
3. Insert three (3) AAA size batteries following the orientation shown on the battery holder. (see Fig 5).
4. Reinstall the battery housing into the product. (see Fig 6).
Limited Warranty
Your MULTIFUNCTION LED LIGHT has been manufactured using the highest quality materials and workmanship. All Intex products
have been inspected and found free of defects prior to leaving the factory. This Limited Warranty applies only to the MULTIFUNCTION LED
LIGHT.
The provisions of this Limited Warranty apply only to the original purchaser and is not transferable. This Limited Warranty is valid for a period
of one (1) year from the date of the initial retail purchase. Keep your original sales receipt with this manual, as proof of purchase will be
required and must accompany warranty claims or the Limited Warranty is invalid.
If a manufacturing defect is found within this one (1) year period, please contact the appropriate Intex Service Center listed in the separate
“Authorized Service Centers” sheet. The Service Center will determine the validity of the claim. If the Service Center directs you to return the
product, please carefully package the product and send with shipping and insurance prepaid to the Service Center. Upon receipt of the
returned product, the Intex Service Center will inspect the item and determine the validity of the claim. If the provisions of this warranty cover
the item, the item will be repaired or replaced at no charge.
Any and all disputes regarding the provisions of this Limited Warranty shall be brought before an informal dispute settlement board and
unless and until the provisions of these paragraphs are carried forth, no civil action may be instituted. The methods and procedures of this
settlement board shall be subject to the rules and regulations set forth by the Federal Trade Commission (F.T.C.). IMPLIED WARRANTIES
ARE LIMITED TO THE TERMS OF THIS WARRANTY AND IN NO EVENT SHALL INTEX, THEIR AUTHORIZED AGENTS OR
EMPLOYEES BE LIABLE TO THE BUYER OR ANY OTHER PARTY FOR DIRECT OR CONSEQUENTIAL DAMAGES OR LIABILITIES.
Some states, or jurisdictions do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or
exclusion may not apply to you.
This Limited Warranty does not apply if the MULTIFUNCTION LED LIGHT is subject to negligence, abnormal use or operation, accident,
improper operation, improper voltage or current contrary to operating instructions, or to damage by circumstances beyond Intex’s control,
including but not limited to, ordinary wear and tear and damage caused by exposure to fire, flood, freezing, rain, or other external
environmental forces. This Limited Warranty applies only to those parts and components sold by Intex. The Limited Warranty does not cover
unauthorized alterations, repairs or disassembly by anyone other than Intex Service Center personnel.
DO NOT GO BACK TO THE PLACE OF PURCHASE FOR RETURN OR REPLACEMENT. IF YOU ARE MISSING PARTS OR NEED
ASSISTANCE, PLEASE CALL US TOLL-FREE (FOR U.S. AND CANADIAN RESIDENTS): 1-800-234-6839.
Proof of Purchase must accompany all returns or the warranty claim will be invalid.
➢ Turn clockwise to convert light into 360 degree
lantern; can be hung or placed on the table.
➢ Turn counterclockwise to convert light to a flashlight/torch.
Amount of turn adjusts the spotlight beam-angle and focus
distance. Hanging light in flashlight mode produces a
downward spotlight effect.
Fig 2 C
Fig 2 D
Fig 3
Fig 4 Fig 5 Fig 6