Jas-Audio ORIOR - Manual (Page 3)

Unpacking Inspection
The tweeter of JAS Orior speaker is protected with a Transparent-Protective-
Sheet to prevent damaging on the Tweeter Unit
(Dispersion Board + Driver Net)*.
Customers are recommended to remove the
Transparent-Protective-Sheet immediately before
using or installing on your listening system!
Well prepared before Settling
Two caution on your speakers’near placing:
I.
Do not place any kinds of metal pieces, such as: keys, needles,
staples... etc. near or closed to the Orior＇s tweeter units, because the
magnetic field can cause a strong attractive force to damage the
speaker.
II. Do not use vacuum cleaner on the speaker drivers; on the other hand,
do not direct coupling the speaker drivers by strong air via
compression gun. Any extreme blowing may damage the speakers.
* If you feel the speakers sounded very muffled and distant (abnormal); as if,
please double check
all tweeter unit were covered by the Transparent-
Protective-Sheets or not?
Product Features
Cabinet
• High quality MDF (Medium Density Fiber-board)
• Inner horizontal plane bracing adds extreme rigidity
• Pure natural wool for the best vibration and resonance damping
• Top grade authentic wood veneer with polyester piano finish
• Custom machined, high current binding posts
Page 3 of 7
http://www.jas-audio.com