Jas-Audio ARRAY 1.1 PRE-AMP User Manual
Page 3
Features of Array 1.1 2A3 Pre-amplifier
Selected and matched 2A3, 6SN7 and 6922 tubes
Four line stage stereo inputs
Two line stage stereo outputs
Separate tube rectifiers and regulators for each channel
Separate wide-band audio output transformers
All transformers are electrically isolated and mechanically shock-mounted
Additional internal damping material for added control of mechanical resonance
4 and 8-ohm output impedance taps for optimum speaker impedance matching
The internal wiring circuit is welded through completely manual lap welding,
with uniform and firm welding points. All insulating wires are silver-plated
flame retarding wires
Vibration-absorbing elastomer feet
Fuse protect amplifier circuit in case of over current
Page 3 of 5
http://www.jas-audio.com