Jas-Audio BRAVO 1.1 LE PRE-AMP - Manual (Page 9)

was purchased.
2. If the equipment is being used outside the country of purchase, you
should contact JAS Audio National distributor in the country of residence
who will advise where the equipment can be serviced.
To validate your warranty, you will need the original sales invoice
or other proof of ownership and date of purchase.
Technical Specifications
Product Model: JAS Bravo 1.1 LE
Description: Vacuum Tube Pre-amplifier
Power Requirement: AC 110/117, 220/240 @ 50-60Hz set for local supply
Max Output:
50V
Input Impedance: 47KΩ
Frequency Response: 10Hz --- 40KHz (- 1dB)
Total Harmonic Distortion:
≤ 0.035% (out 2V)
S/N ratio: 91dB
Tube complement: 12AX7 X 2, 12AT7 X 2, 5Z4P x 1
Static Power Consumption:
≤ 50W
Dimensions of Amplifier Chassis: 280mm (W) X 280mm (D) X 140mm (H)
Dimensions of Power Supply: 150mm (W) X 260mm (D) X 140mm (H)
Packing Box Sizes: 480mm (W) X 380mm (D) X 450mm (H)
Net Weight: 14 kg
Gross/Shipping Weight: 15.5 kg
*Please allow at least 10 minutes of warm up time to its optimal
performance.
JAS AUDIO is constantly striving new design improvements, we reserve the
right to change or modify product specifications without prior notice
Note: All Bravo 1.1 LE amplifiers have their own serial number (S/N xxxxx) marked
on the back of chassis and is also printed on the exterior of the packing box.
Happy Listening to all music lovers!
Best Regards,
Set your mind free!
Version 1.0 and Copyright © June 2008 JAS AUDIO
Page 9 of 9
http://www.jas-audio.com