Jaypro Sports BBC-UBKIT - Manual (Page 19)

© 2010 Jaypro Sports Equipment BBC-700B-M 02-08-2012
19 of 24
ASSEMBLE THE CAGE FRAME.
1. Protect the floor of the building by inserting wood blocks under all fame segments and fittings.
While drilling or screwing frame together, protect the floor where you are working with a scrap
piece of plywood. This will protect the floor surface should a drill accidentally slip from it’s
intended direction.
2. Assemble in final position by aligning the motor reference point to the centerline of the cage’s
12’ on the ground.
3. Assemble all segments loosely until square is established, then screw together the segments.