Jaypro Sports BBC-WLKT - Manual (Page 9)

REV - , 5/10 9 of 10
Hollow Wall – Non-Filled CMU
No. 1 Type Tumble Toggle
The No. 1 tumble toggle features a tilting type toggle head, which is riveted to
a flattened end screw. This design permits either pre-installing the fastener to
the fixture or into the hole. Also it is the strongest hollow wall anchor.
13. Turn wing to position parallel to bolt and insert through hole drilled in wall.
14. Wing flips to vertical by gravity. Remove nut and place bracket over hole.
15. Replace and tighten nut. Bracket is now held in place.
Installer Note: Only a ½” (1/2-13 x 6”) diameter bolt type recommended, requiring a 7/8” diameter
hole to be drilled. For availability, please contact Jaypro Sports New Construction Customer Service.
Solid Wall – Pre-Cast Concrete, Brick, or Filled Block
½” “Double” Dual Expansion Machine Bolt Anchor
The double is a dual expansion machine bolt anchor particularly suited for materials of questionable
strength. It can be used in solid concrete, block, brick and stone. It consists of twin tubular sleeves,
bound together with high tension spring steel bands which contains two protruding wedge shaped
hollow cones. One cone is smooth, white the other is threaded. Internal lugs on the tapered ends of the
hollow cones prevent them from rotating during anchor expansion. As the anchor is tightened, the
opposing wedges at either end are drawn in tightly providing full length, 360° expansion over a large
bearing area. For maximum expansion, the upper cone should protrude slightly before setting.
1. Drill hole of recommended diameter (⅞” for a ½” bolt) into the base material to a depth equal
to, or slightly deeper than the length of the expansion anchor. Clean out the hole of all dust and
cuttings.
2. Place the Double Expansion anchor, nut end first, into the hole. The top end of the anchor
should be flush or slightly below the base material surface.
3. Place the object to be fastened over the anchor in the base material and bolt in to place.
Installer Note: Only ½” bolts are recommended for use by Jaypro. For availability, please contact
Jaypro Sports New Construction Customer Service.
Jaypro Part
Number
HM6212
Jaypro Part Number
HM6212