Jaypro Sports BLDP-475TRG - Manual (Page 4)

REV-A, 4/10
Assemble Frame:
3. Assemble undercarriage frame as shown in figure 3. Vertically plumb and
square each leg before tightening cross-bracing hardware.
FIGURE: 3
Install Seat and Foot Planks:
4. Install end caps on both ends of each plank as shown in figure 4 – lightly
tap on with a rubber mallet if necessary. Secure end caps in place using
the #8 pan head self-drilling screws.
FIGURE: 4