Casio EXILIM EX-F1 - Manual (Page 106)

106
Other Playback Functions (PLAY)
Other Playback Functions (PLAY)
This section explains menu items that you can use to configure settings and perform
other playback operations.
Procedure
[p] (PLAY) * [MENU] * PLAY Tab * Slideshow
For information about menu operations, see page 77.
Playing a Slideshow on the Camera (Slideshow)
Start Starts the slideshow
Images
Specifies the type of images to be included in the slideshow
All images: Snapshots, movies, continuous shutter images
All images except
Z : All non-continuous shutter (CS) images
T
Only: Snapshots only
»
Only: Movies only
One Image: One single selected image (selected using [4] and [6])
Time
Time from the start to the end of the slideshow
1 to 5 minutes, 10 minutes, 15 minutes, 30 minutes, 60 minutes
Interval
Amount of time each image remains displayed
Use [4] and [6] to select a value from 1 to 30 seconds, or “MAX”.
If you specify a value from 1 to 30 seconds, movies play from beginning
to end.
When the slideshow reaches a movie file while “MAX” is selected, only
the first frame of the movie will displayed.
Effect
Select the effect you want.
Pattern 1 to 5: Plays background music and applies an image change
effect.
• Patterns 1 through 4 have different background music, but they all use
the same image change effect.
• Pattern 5 can be used for playback of snapshots only (except for
those that are part of a CS group), and the “Interval” setting is ignored.
• Movies that include audio are played back without BGM. Movies that
do not include audio are played back with BGM.
• The currently selected image change effect setting is disabled
automatically in following cases.
– When playing a slideshow for which “» Only” or “One Image” is
selected for the “Images” setting
– When the interval setting is 1 second or 2 seconds.
– Before and after playback of a movie
– During CS group playback
Off: No image change effect or background music