Cobra Electronics MARINE MR F75-D - Manual (Page 32)

Call Log and Distress Log
Call Log functions similarly to the caller ID function on your telephone.
It will capture the caller’s MMSI identification number and any other data
included in a DSC message.
NOTE
The call waiting memory can hold up to 20 messages. Once the memory
becomes full, each new call will erase the oldest call information on a
first-in first-out basis.
To Review Call Log Messages Received
While In DSC Standby Mode:
1. From Standby mode, press the Call/Set button
to enter the Call Send menu.
2. Use the Up/Down buttons to scroll to CALLLOG
3. Press the Call/Set button to enter the Call Log mode.
NOTE
The fourth line will show the type of message.
4. Use the Up/Down buttons to move from message
to message in the call log memory.
5. Press the Call/Set button to return to Standby mode.
Nothing Comes Close to a Cobra ® 59 58 English
Digital Select Calling (DSC)
Operation
Operating Your Radio
Call Waiting
Standby Mode
Reviewing Messages
Operating Your Radio
Digital Select Calling (DSC)
Operation
All Messages Viewed
Unread Messages
Call Log and Distress Log continued
To Clear Messages From The Call Log Memory:
1. From Standby mode, press the Call/Set button
to enter the Call Send menu.
2. Use the Up/Down buttons to scroll to CALLLOG
(call waiting).
3. Press the Call/Set button to enter the Call Log mode.
NOTE
The fourth line will show the type of message.
4. Use the Up/Down buttons to select the message
you want to delete.
5. Press and hold the Memory Scan/Memory Clear button
for one (1) second or more.
Repeat steps 4 through 5 to delete additional messages.
6. Press the Call/Set button to return to Standby mode.
F75D_OPERATION:F75-Operation-8 12/13/10 3:53 PM Page 58