Jaypro Sports NSGWK - Manual (Page 5)

Rev-B Page 5 of 7
IMPORTANT NOTICE:
1) BEFORE EACH USE CHECK EQUIPMENT FOR PROPER CONNECTING
HARDWARE AND STRUCTURAL INTEGRITY. REPLACE DAMAGED OR
MISSING HARDWARE IMMEDIATELY.
2) USE OF THIS EQUIPMENT OTHER THAN INTENDED, MAY BE
HAZARDOUS.
3) ALTERATION OR MODIFICATION OF THIS EQUIPMENT MAY BE
HAZARDOUS AND RESULT IN INJURY. FOR REPAIR OR REPLACEMENT,
CONTACT YOUR DEALER OR JAYPRO SPORTS.
*** ASSEMBLY INSTRUCTIONS REQUIRES 3 PEOPLE ***
TOOLS REQUIRED:
(1) Socket Wrench and Box Wrench
(1) 7/32” Allen Wrench
 Unpack all parts and check against parts list to ensure that all have been
included.
 Inspect all parts for damage. Report any damages to the trucking company.
Front Goal Face Assembly:
1. Insert item #3 into the channel of the soccer base.
2. Place item #4 on top of the channel of the soccer base.
3. Assemble wheel on to item #2 with 5/8” hardware.
4. Install 3/8” plate stop hardware.
5. Attach item #2 on to item #1, critical to note the orientation of the hole
in item #1.
6. Assemble item #1 on to item #4 with 3/8” hardware.