Jaypro Sports SMG-8HP - Manual

DETAIL A
ITEM # 8 IS PRE-INSTALLED
SLIDE PIPES TOGETHER AS SHOWN
Parts List
DESCRIPTION PART NUMBER QTY ITEM
LOWER CROSSBAR W/ FEET SMG-81A 1 1
LOWER CROSSBAR W/ FEET W/ SWAGE END SMG-81B 1 2
UPPER CROSSBAR SMG-82A 1 3
UPPER CROSSBAR W/ SWAGE END SMG-82B 1 4
FRONT UPRIGHT W/ FEET SMG-83A 2 5
MIDDLE CROSSBAR SMG-83B 2 6
4" SQUARE, 3 mm ORANGE POLYETHYLENE NETTING SMG-8NHP 1 7
SNAP BUTTON CLIP ON (PRE-INSTALLED) HM5051 8 8
A
1
1
2
2
3
3
4
4
A A
B B
DATE: DRAWN BY:
5/13/2013
MODEL NUMBER: CHECKED BY:
PRODUCT NAME:
Moune T.
SMG-8HP
MINI SOCCER GOAL
WVB
REV:
A
SHEET:
1 OF 1
48"
96"
48"
NOTES:
1. FOR SAFE OPERATION AND CONTINUED HIGH
PERFORMANCE FROM THIS EQUIPMENT,
INSPECTION AND MAINTENANCE MUST BE
PERFORMED BEFORE EACH USE.
2. USE OF THIS EQUIPMENT, OTHER THAN
INTENDED, MAY BE HAZARDOUS.
3. ALTERATION OR MODIFICATION OF THIS
EQUIPMENT MAY BE HAZARDOUS.
ASSEMBLY INSTRUCTIONS:
1. NET IS ATTACHED BY WEAVING FRAME PIPES IN AND OUT OF THE
PERIMETER OF THE NET.
2. ASSEMBLE TOP CROSSBAR (3,4) AND BOTH SIDE FRAMES (5, 6). NOTE
THAT LOWER CROSSBAR MEMBERS HAVE RUBBER "FOOT" PADS.
3. LAY NET OUT ON FLAT SURFACE AND DETERMINE TOP AND BOTTOM
EDGES.
4. GRADUALLY WEAVE THE TOP CROSSBAR THROUGH THE TOP OF NET.
5. GRADUALLY WEAVE ONE SIDE FRAME THROUGH THE SIDE OF THE NET.
ATTACH THE SIDE FRAME TO THE TOP CROSSBAR.
6. REPEAT STEP 5 FOR OTHER SIDE.
7. GRADUALLY WEAVE ONE REAR CROSSBAR MEMBER (1, 2) AT A TIME
THROUGH THE BOTTOM OF THE NET.
8. ASSEMBLE BOTH REAR CROSSBAR MEMBERS TOGETHER.
9. ATTACH REAR CROSSBAR TO EACH SIDE FRAME.
8
7
1
2
4
3
5
6
5
6 2
JAYPRO LOGO LABEL
REV DESCRIPTION DATE BY
A CHANGE NET MATERIAL 5/13/2013 Moune T.