Jeep 2013 Wrangler User Manual
Page 222
Advertising
6. Clip the front of the door rail over the side bar making
sure that the material for the side bar cover is not
pinched by the door frame.
7. Position the rear of the front door frame to lay on top
of the front of the rear door frame. Ensure the seals are
installed correctly to avoid water leaks.
8. Loosely install both knobs beginning with the front
knob (long knob). Then, install the middle knob (short
knob) through the front and rear door frames and
screw into the top of the B-pillar.
9. Tighten the front knob, then the rear most knob, and
then the middle knob. Repeat this procedure for the
other side.
220
UNDERSTANDING THE FEATURES OF YOUR VEHICLE
Advertising