Canon DC20 EN - Manual (Page 53)

53
Ad
v
a
nced F
e
atures
More Recordi
ng Opt
ion
s
E
Changing the Focusing Mode
You can change the AF (autofocus) frame selection mode.
1. Set the camcorder to record still images ( ) and move the
mode switch to a position other than .
• The setting differs depending on the position of the mode switch.
: 9 Point AiAF
, : 9 Point AiAF or Center point
• The focusing mode cannot be changed in the Fireworks recording program (SCN).
2. Select ( ) the focusing mode.
• Auto selection: four framing corners will appear on the screen when making the
selection; the frame corners do not appear in the regular recording mode.
• Center point: a single focusing frame appears in the center of the screen when
making the selection; the frame will appear in white in the regular recording mode.
You cannot select the AF frame while recording in Stitch Assist mode.
9 Point AiAF
(Auto selection) Depending on the shooting conditions, one or more AF
frames out of the nine frames available are automatically
selected and focused on.
Center point Out of the nine frames available, the center AF frame is
selected to focus. This is convenient for making sure the
focus is exactly where you want it.