Canon IMAGE RUNNER 5065 - Manual (Page 51)

Protocol Settings 3-5
3
Usin
g a
TCP/IP Netw
or
k
3
On the TCP/IP Settings screen, press [DNS Settings]
➞ [DNS
Server Address Settings].
4
In <IPv4>, specify the following.
If you want to use dynamic DNS updating, enter the IPv4 address of the DNS
server in [Primary DNS Server].
If you do not want to set up a secondary DNS server, enter <0.0.0.0>.
IMPORTANT
If you set [BOOTP] or [DHCP] to 'On' in step 2, the IP address of a DNS server you
set manually will be overwritten.