Canon IMAGE RUNNER 5065 - Manual (Page 39)

Communication Environment Setup 2-11
2
Settings Common
to t
h
e Netw
or
k
Protocols
Communication Environment Setup
This section describes how to set up the environment for communication between
the machine and computers on your network. If you are configuring the settings for
the first time, use the control panel of the machine.
After configuring the settings, you can change them using software other than the
control panel of the machine. For details, see "Network Setting Items," on p. 8-2.
1
On the Network Settings screen, press [SNMP Settings]
➞
specify the settings for SNMP v. 1.
[On] for <Use SNMP v. 1>: Follow the procedure below to specify the MIB
access permissions and community names.