Casio EA-200 - Manual (Page 59)

20031201
(12) Tapping the [ xy Line] or [Scatter] down arrow button displays a list of the plot point
types.
• The following shows the type of graph produced by each possible setting available on
the Graph Plot Type dialog box.
dot
ldot
square
cross
Scatter xy Line
(13) Tap [Set].
• This closes the Graph Plot Type dialog box. The current plots settings are indicated
under each of the graph names (Gph1, Gph2, Gph3) on the E-Con Graph Editor
window.
• Repeat steps (10) and (12) for the other graphs, if you want.
(14) To start actual drawing of the graph, tap n.
• This displays the E-Con Graph window and draws the graph in accordance with the
settings of the [Normal] tab.
• For details about the operations you can perform on the E-Con Graph window, see
“9 E-Con Graph Window Operations”.
8-7
Graphing Data