Crown Equipment Walkie Stackers WE 2300 Series - Manual (Page 7)

WS 2300 Series Technical Information
Standard Equipment
1. Four-point suspension with
centrally located handle
2. Traction speed control
(MOSFET)
3. Variable traction speed
forward and reverse
4. One-speed lift, two-speed
lower
5. Electric brake
6. Brake override
7. Key switch
8. Horn
9. Compound drive and
lift motor
10. Emergency power
disconnect
11. Battery connector SB-175
12. Reversing button
13. Hour meter
14. Vulkollan tires
Optional Equipment
1. Battery compartment rollers
2. Battery discharge indicator
with low battery lift interrupt
and hour meter
3. Freezer corrosion conditioning,
continuous -30° C / -22° F,
intermittent - 40° C / - 40° F
4. Load backrest
5. Maintenance-free battery
pack
6. Sideshift
Electrical System
24-volt electrical system
incorporating:
1. Transistor “MOSFET”
controller, microprocessor
controlled with on-board
service diagnostic capability.
This transistor controller
provides many benefits
such as maximum energy
efficiency, reduced
maintenance and infinite
speed control capability.
Fault Monitoring System
Through a fault flash code
signaled by an LED, 17
detectable faults can be
recognized. Using an optional
hand set, faults can be displayed
digitally. Controller settings are
programmable. Functional
tests of components are also
possible. Incorporates storage
register for fault history that can
be interrogated by service
personnel.
2. Heavy-duty drive and lift
motors provide high reliability
and efficiency.
3. Electric panel with swing-out
feature, allows good acces-
sibility and serviceability to
the distribution panel and all
other electrical components.
4. Emergency disconnect is
easily accessible from all
operating positions.
5. Solid-state switching ensures
high component reliability.
6. Control and power circuits
are fused. Distribution panel
and controller are short-
circuit protected.
7. All wiring is color coded.
Hydraulic System
1. Heavy-duty compound
motor and gear pump
selected for optimum lift
performance and low noise.
2. Control block houses
proportional pressure
compensated flow control
valve, check valve, relief
valve and direction control
valve to select lower
function. The proportional
valve ensures smooth
load handling. Single speed
lift and two speed lowering
is available to the operator.
3. Cylinder rods are hard-plated
chrome with polyurethane
seals.
4. Relief valve tuned to capacity
protects all components in
the hydraulic system.
Drive Unit/Brake
Heavy-duty gear box with
helical spur input gear for low
noise emission. Drive unit is
equipped with an electro-
magnetic brake, spring applied,
electrically released. The brake
is activated by the control
handle position.
Frame/Pivoting Carriage
Frame and Articulated Truck
Suspension system (ATS) are
of a rugged design ensuring
minimum deflections during
operation. Modular pivoting
carriage design ensures excellent
traction, optimum truck stability
and minimum steering effort in
all load conditions. Easy service-
ability of all components in
power unit and simple adjust-
ment to compensate for tire
wear is possible. Single swing-
out door design allows easy
access to all components.
Mast
High visibility two- and three-
stage mast design features
nested I-beams and canted
rollers. Lift cylinders are posi-
tioned in outer I-beam profile
for best visibility through mast
and clear view onto fork tips
during load handling. Standard
equipment includes full-free lift
for two- and three-stage mast.
Mast cushioning between
stages ensures smooth
operation. Heavy-duty mast
and chain rollers are sealed
and lubricated for life. Easy
access to carriage rollers.
Fork Carriage
WS 2300 Series features a
standard 32" wide ITA Class II
fork carriage. Forks are
adjustable from 10" to 31".
Standard fork lengths are
30", 36", 42" 45" and 48".
Operator Controls
The robust X10™ control handle
is designed to allow for an
optimum turning radius with low
steer effort. All control buttons
can be operated with either
hand and can be accessed
with minimum hand and wrist
movement. The horn buttons
are integrated in the hand grips.
An ergonomic forward/reverse
thumb wheel allows for precise
maneuvering. Depending on
conditions and operator
experience, maximum travel
speed can be reduced via the
rabbit/turtle switch. Exclusive
brake override allows slow
speed travel with the handle
near vertical. This feature
improves maneuverability in
tight areas.
Battery
Removable side panels and top
hinged cover allow easy access
to battery, as well as battery
change in three directions,
either side or top lift out.
Compartment rollers are fitted
as an option.
Other Options
1. Audible travel alarm
2. Flashing lights
Safety considerations and
dangers associated with audible
travel alarms and flashing lights
include:
• Multiple alarms and/or lights
can cause confusion.
• Workers ignore the alarms
and/or lights after day-in and
day-out exposure.
• Operator may transfer the
responsibility for “looking out”
to the pedestrians.
• Annoys operators and
pedestrians.
Dimensions and performance
data given may vary due to
manufacturing tolerances.
Performance is based on an
average size vehicle and is
affected by weight, condition of
truck, how it is equipped and
the conditions of the operating
area. Crown products and
specifications are subject to
change without notice.