Setting the z-enhancer, Adjusting the tone, Setting tone bypass – Clarion RDX755Dz User Manual

Page 9: Basic operations adjusting the bass, Adjusting the treble, Adjusting the balance, Adjusting the fader

Advertising
background image

RDX755Dz

11

∗

When you have entered a title in a CD, it ap-
pears in the sub display.

If you have not en-

tered a title, “NO-TTL” appears in the title dis-
play instead. For information on how to enter a
title, refer to the subsection “Entering titles”
in the “Other Handy Functions”.

Setting the Z-enhancer

This unit comes with 3 types of sound tone effects
stored in memory. Select the one you prefer.

∗

The factory default setting is “Z-EHCR OFF”.

Each time you press Z-EHCR button

8

, the tone

effect changes in the following order:

“Z-ENHANCER 1”

➜

“Z-ENHANCER 2”

➜

“Z-

ENHANCER 3”

➜

“Z-EHCR OFF”

➜

“Z-

ENHANCER 1”...

• Z-ENHANCER 1: bass emphasized

• Z-ENHANCER 2: treble emphasized

• Z-ENHANCER 3: bass and treble emphasized

• Z-EHCR OFF

: no sound effect

Adjusting the tone

Press A-M button

$

and select the item to adjust.

Each time you press A-M button

$

, the item

changes in the following order:

●

When the Z-enhancer and tone bypass are off

“T-BYPASS”

➜

“BASS”

➜

“TREBLE”

➜

“BALANCE”

➜

“FADER”

➜

Function mode...

●

When Z-enhancer 1, 2 or 3 is set

“Z-EHCR”

➜

“BALANCE”

➜

“FADER”

➜

Function mode...

Setting tone bypass

The tone bypass disables the tone (bass and
treble) functions and cuts the noise generated
when the tone functions are on.

1. Press A-M button

$

and select “T-BYPASS”.

2. Turning the Rotary knob

&

clockwise sets the

tone bypass to “YES” (ON); turning it
counterclockwise sets the tone bypass to
“NO” (OFF).

∗

The factory default setting is “NO” (OFF).

∗

If the setting is “YES” (ON), the bass and treble
adjustments cannot be made.

3. When the adjustment is complete, press A-M

button

$

several times until the function mode

is reached.

Note:
• If you set the Z-ENHANCER function to ON (1 to

3), you cannot set the tone bypass.

Basic Operations

Adjusting the bass

1. Press A-M button

$

and select “BASS”.

2. Turning the Rotary knob

&

clockwise empha-

sizes the bass; turning it counterclockwise
attenuates the bass.

∗

The factory default setting is “0”. (Adjustment
range: –6 to +6)

∗

The bass cannot be adjusted if the tone by-
pass setting is “YES” (ON).

3. When the adjustment is complete, press A-M

button

$

several times until the function mode

is reached.

Adjusting the treble

1. Press A-M button

$

and select “TREBLE”.

2. Turning the Rotary knob

&

clockwise empha-

sizes the treble; turning it counterclockwise
attenuates the treble.

∗

The factory default setting is “0”. (Adjustment
range: –6 to +6)

∗

The treble cannot be adjusted if the tone by-
pass setting is “YES” (ON).

3. When the adjustment is complete, press A-M

button

$

several times until the function mode

is reached.

Adjusting the balance

1. Press A-M button

$

and select “BALANCE”.

2. Turning the Rotary knob

&

clockwise empha-

sizes the sound from the right speaker; turn-
ing it counterclockwise emphasizes the sound
from the left speaker.

∗

The factory default setting is “0”. (Adjustment

range: L13 to R13)

3. When the adjustment is complete, press A-M

button

$

several times until the function mode

is reached.

Adjusting the fader

1. Press A-M button

$

and select “FADER”.

2. Turning the Rotary knob

&

clockwise empha-

sizes the sound from the front speakers; turn-
ing it counterclockwise emphasizes the sound
from the rear speakers.

∗

The factory default setting is “0”. (Adjustment
range: F12 to R12)

3. When the adjustment is complete, press A-M

button

$

several times until the function mode

is reached.

Advertising