CREATIVE WIRELESS RECEIVER SB1122 - Manual (Page 15)

Other Information 14
Other Information
Understanding the Power LED
Understanding the Link LED
Returning to factory default settings
Return to the factory default settings if you want to
• revert to the original volume setting,
• reset your zone numbering sequence, or
• “unpair” a receiver.
LED Behavior Status
White Stable Turned on and ready for use
Continuous slow flashing Not detecting any signal or signal
is weak
Red Stable In Standby mode
Quick flashing (twice) Receiving remote control signals
Continuous slow flashing Muted
LED Behavior Status
Green Stable Paired (Turned on / In Standby
mode)
Flashing Pairing in progress
Quick flashing (twice) -> Not lit ->
Stable Wireless reset
Not lit – Connection lost